The mold is made of ABS plastic, it can be used for casting plaster and concrete. So it has stable performance and excellent quality.  One mold can produce many turtles for arranging garden paths. Each concrete turtle that you make can be easily sold, making it a very profitable mold to have.  Fill the mold with cement mortar, compact ( ensure that all voids are filled up ), and smooth, and after the mortar dry, remove the model. These concrete turtles are suitable for lawns, parks, gardens, beaches you can walk, or as the landscape. They are very durable to use. Be a nice decoration for your garden, you must fall in love with it. A perfect tool for garden creating and decoration

Specs:

• Mold: 44.3cm x 38cm x 4cm/17.44" x 14.96" x 1.57" (Approx.)
• Finished Turtle: 40cm x 34cm x 3.8cm/15.75" x 13.39" x 1.5" (Approx.)

✔Step 1: Mix cement with water, according to package directions. When ready to use, the concrete will be the consistency of oatmeal and thick enough to hold an edge when you slice into it with a shovel.

✔Step 2: Fill the paver mould, scooping the concrete in with a shovel and making sure to fill each area.

✔Step 3: Using rubber gloves, spread the concrete around the mould, filling in any gaps or low points. Tap the mould with your hand to eliminate any air bubbles.

✔Step 4: Following the contours of the mould, smooth out the concrete, wiping away any excess.

✔Step 5: Allow the concrete to set for a maximum of five minutes, then carefully remove the mould. For the next stretch, rotate the mould a quarter-turn and place it beside the paver just completed, angling slightly if you're creating a curving pathway.

✔Step 6: After letting the concrete cure overnight, fill the cracks with dirt and wash away any excess. Wet the ground around the newly formed pavers to help them settle.